Fluke Flk-369 Fc: Full Specifications, Comparisons, Manuals, Pros And Cons, Problems, And Where To Buy

Fluke FLK-369 FC Information

The Fluke 369 FC is a true-rms leakage current clamp meter that helps you detect, document, record, and compare leakage current readings over time. This can help you prevent unplanned downtime and identify intermittent GFCI and RCD trips, all without taking equipment offline.

The 369 FC has a large 61 mm jaw opening for working with extra-large conductors. The jaw is fully shielded to accurately capture very small leakage signals and to minimize external electromagnetic interference. The meter also features a selectable filter function to remove unwanted noise, as well as max/min/average readings and a hold function. A forward-facing LED worklight provides illumination in dark wiring cabinets. The display is backlit and features auto backlight off and auto power off to extend battery life.

The 369 FC is CAT III 600 V rated for safety. It comes with a carrying case, test leads, and batteries.

Image of Fluke FLK-369 FC

Specifications

Feature	Specification
Measurement range	0.01 to 60 A
Accuracy	True-rms: ±0.1% of reading ±2 digits
Resolution	1 μA
Frequency range	40 to 1000 Hz
Jaw opening	61 mm
CAT rating	CAT III 600 V
Data logging	Up to 65,000 points
Display	Backlit LCD with 4000 counts
Weight	450 g
Dimensions	190 x 65 x 40 mm

Features

• True-rms measurements for accuracy when measuring complex, non-sinusoidal waveforms.
• 61 mm jaw opening for working with extra-large conductors.
• Fully shielded clamp jaw to accurately capture very small leakage signals and to minimize external electromagnetic interference.
• Selectable filter function to remove unwanted noise.
• Max/min/average readings and hold function.
• Forward-facing LED worklight for use in dark wiring cabinets.
• Backlit display with auto backlight off and auto power off for extended battery life.
• CAT III 600 V safety rating.
• Data logging up to 65,000 points.

What's in the box

• Fluke 369 FC clamp meter
• Carrying case
• Test leads
• Batteries
• Instruction manual

The Fluke 369 FC is a versatile and powerful leakage current clamp meter that can help you troubleshoot electrical problems and prevent downtime. It is a reliable and accurate tool that is easy to use and has a variety of features to make your job easier.

Fluke FLK-369 FC Compare with Similar Item

a table comparison of the Fluke FLK-369 FC with some similar items:

Feature	Fluke FLK-369 FC	Klein Tools ET330	Amprobe TMD300
Display	3.5" color display	3.5" color display	2.4" color display
Accuracy	±1%	±1%	±2%
Resolution	0.1 mV	0.1 mV	0.1 mV
Max voltage	750 V AC/DC	750 V AC/DC	600 V AC/DC
Max current	10 A AC/DC	10 A AC/DC	10 A AC/DC
Dimensions	7.1 x 2.8 x 1.3 in	7.2 x 2.8 x 1.3 in	6.2 x 2.8 x 1.3 in
Weight	11.8 oz	11.6 oz	10.2 oz
Price	$299	$249	$199

As you can see, the Fluke FLK-369 FC is a very capable multimeter with a large, clear display and accurate measurements. It is also relatively lightweight and portable. However, it is also the most expensive of the three multimeters. The Klein Tools ET330 and Amprobe TMD300 are both less expensive multimeters with similar features. The Klein Tools ET330 has a slightly larger display than the Fluke FLK-369 FC, but the Amprobe TMD300 has a slightly higher accuracy rating. Ultimately, the best multimeter for you will depend on your individual needs and budget.

Here are some additional details about each multimeter:

• The Fluke FLK-369 FC has a variety of features that make it a good choice for professionals, including a CAT IV 600 V safety rating, a built-in data logger, and a variety of measurement modes.
• The Klein Tools ET330 is a good value-priced multimeter with a variety of features, including a CAT III 1000 V safety rating, a built-in flashlight, and a variety of measurement modes.
• The Amprobe TMD300 is an entry-level multimeter with a variety of features, including a CAT III 600 V safety rating, a built-in holster, and a variety of measurement modes.

Fluke FLK-369 FC Pros/Cons and My Thought

The Fluke FLK-369 FC is a true-rms leakage current clamp meter that can be used to detect, document, record, and compare leakage current readings over time. This can help to prevent unplanned downtime and identify intermittent GFCI and RCD trips.

The FLK-369 FC has a large 61 mm jaw for working with extra-large conductors. The jaw is also fully shielded to accurately capture very small leakage signals and minimize external electromagnetic interference. The meter has a resolution of 1 μA and can measure currents up to 60 A. It also has a number of other features, including a filter function to eliminate unwanted noise, max/min/average readings, and a hold function.

Here are some of the pros and cons of the Fluke FLK-369 FC:

Pros:

• Large jaw for working with extra-large conductors
• Fully shielded jaw for accurate leakage current measurement
• High resolution of 1 μA
• Can measure currents up to 60 A
• Filter function to eliminate unwanted noise
• Max/min/average readings
• Hold function
• Backlit display with automatic shutoff
• CAT III 600 V overvoltage category
• Storage for up to 65,000 measurement records

Cons:

• Can be expensive
• Not as rugged as some other clamp meters
• Display can be difficult to read in bright sunlight

Here are some user reviews of the Fluke FLK-369 FC:

Positive reviews:

• "This is a great clamp meter for finding leakage currents. It's easy to use and has a lot of features."
• "I've used this meter to troubleshoot a number of electrical problems, and it's always been accurate and reliable."
• "The large jaw is really helpful for working with large conductors."
• "The filter function is very useful for eliminating unwanted noise."
• "The max/min/average readings are a great way to track leakage current over time."

Negative reviews:

• "It's a bit expensive."
• "The display can be difficult to read in bright sunlight."
• "It's not as rugged as some other clamp meters."

Overall, the Fluke FLK-369 FC is a well-made and accurate clamp meter that is ideal for finding leakage currents. It is easy to use and has a number of features that make it a valuable tool for electricians and other electrical professionals. However, it is a bit expensive and the display can be difficult to read in bright sunlight.

My thoughts:

I think the Fluke FLK-369 FC is a great clamp meter for finding leakage currents. It is accurate, easy to use, and has a number of useful features. However, it is a bit expensive and the display can be difficult to read in bright sunlight. If you are looking for a high-quality clamp meter with a lot of features, the Fluke FLK-369 FC is a great option. However, if you are on a budget or need a clamp meter that is easy to read in bright sunlight, there may be better options available.

Fluke FLK-369 FC Where To Buy

some places where you can buy the Fluke FLK-369 FC and spare parts:

• Fluke Direct: This is the official website of Fluke, the manufacturer of the FLK-369 FC. You can buy the multimeter directly from Fluke Direct, and they also sell spare parts.
• Walmart: Walmart is a major retailer that sells a wide variety of products, including the FLK-369 FC. You can usually find the multimeter in the electronics department.
• Amazon: Amazon is another major retailer that sells the FLK-369 FC. You can usually find the multimeter at a lower price on Amazon than at other retailers.
• Best Buy: Best Buy is an electronics retailer that sells the FLK-369 FC. You can usually find the multimeter in the multimeter section of the store.
• Lowes: Lowes is a home improvement retailer that sells the FLK-369 FC. You can usually find the multimeter in the electrical section of the store.
• eBay: eBay is an online auction site where you can find used and new multimeters, including the FLK-369 FC. You may be able to find a good deal on a multimeter on eBay.

I hope this helps!

Fluke FLK-369 FC Problems and Solutions

some common issues and solutions for the Fluke FLK-369 FC multimeter from expert users:

• The multimeter is not turning on.
  • Make sure that the multimeter is plugged in and that the battery is installed correctly.
  • If the multimeter is still not turning on, try resetting it by pressing and holding the power button for 10 seconds.
• The multimeter is not displaying readings.
  • Make sure that the multimeter is set to the correct measurement mode.
  • If the multimeter is still not displaying readings, try cleaning the probes with a soft cloth.
  • If the multimeter is still not displaying readings, contact Fluke technical support.
• The multimeter is giving inaccurate readings.
  • Make sure that the probes are properly connected to the multimeter.
  • Make sure that the multimeter is set to the correct measurement range.
  • If the multimeter is still giving inaccurate readings, contact Fluke technical support.
• The multimeter is displaying an error message.
  • Refer to the multimeter's user manual for a list of error messages and their corresponding solutions.
  • If you are unable to find a solution to the error message in the user manual, contact Fluke technical support.

Here are some additional tips for troubleshooting common Fluke FLK-369 FC multimeter issues:

• Always make sure that the multimeter is turned off before you connect or disconnect the probes.
• Do not overload the multimeter by measuring a voltage or current that is higher than the multimeter's rated capacity.
• Store the multimeter in a cool, dry place.
• Clean the multimeter probes regularly with a soft cloth.
• If you are not sure how to troubleshoot a particular issue, contact Fluke technical support.

I hope this helps!

Fluke FLK-369 FC Manual

Fluke FLK-369 FC Leakage Current Clamp Meter Manual

Safety Information

• This meter is a Class III, CAT III 600V safety rated instrument. This means that it is safe to use on circuits up to 600 volts, as long as the user follows the safety precautions listed in this manual.
• Do not use this meter on circuits that are energized above 600 volts.
• Do not use this meter if it is damaged in any way.
• Always wear safety glasses when using this meter.
• Always disconnect the power from the circuit before using this meter.
• Do not touch the exposed conductors of the circuit under test.
• Do not clamp the meter around any conductors that are carrying more than 60 amps of current.
• Do not use the meter in wet or humid conditions.
• Do not store the meter in extreme temperatures or in direct sunlight.

Before Use

• Before using the meter, read and understand the entire manual.
• Make sure that the meter is properly calibrated.
• Install the batteries in the meter.
• Select the correct measurement function for the type of measurement you are performing.
• Set the meter's range to the appropriate value.
• Clamp the meter around the conductor you are measuring.
• Read the measurement on the meter's display.

Troubleshooting

• If the meter displays an error message, consult the troubleshooting section of the manual.
• If the meter does not seem to be working properly, contact Fluke Technical Support.

Maintenance

• Keep the meter clean and free of dirt and debris.
• Do not use harsh chemicals or solvents to clean the meter.
• If the meter gets wet, dry it off immediately.
• Replace the batteries in the meter when the battery level indicator shows low battery.
• Calibrate the meter every year or after any major repairs.

Warranty

• This meter is covered by a one-year warranty.
• The warranty covers defects in materials and workmanship.
• The warranty does not cover damage caused by misuse or abuse.

Contact Information

• Fluke Customer Service: 1-800-443-5875
• Fluke Website: www.fluke.com

Additional Information

• The Fluke FLK-369 FC Leakage Current Clamp Meter is a versatile tool that can be used to measure leakage current in a variety of applications.
• The meter has a large 40 mm jaw opening that can accommodate conductors up to 60 amps.
• The meter also has a number of features that make it ideal for use in harsh environments, such as a fully shielded clamp, a backlit display, and an auto power off function.
• The Fluke FLK-369 FC Leakage Current Clamp Meter is a valuable tool for any electrician or technician who needs to measure leakage current.